Spiriferm is a strongly fermenting dry pure yeast of the Saccharomyces cerevisiae strain. Spiriferm’s fermentation characteristics
are ideal during fermentation of fruit distillery mashes and musts:
- Alcohol tolerance up to 14 % vol.
- Low SO2 and H2S formation
- Rapid fermentation onset
- Recommended fermentation temperature: 16 ‐ 22 °C
- Suitable for all fruit
Dosage
Generally 20 g Spiriferm is dosed to each 100 L mash. The dosage can be increased to 25 ‐ 30 g of Spiriferm per 100 L for microbiologically compromised mashes. Five to ten times the quantity of Spiriferm is rehydrated in a mix of must and water at a ratio of 1 : 1 (35 ‐ 40 °C), i.e. stirred in and left to prime for approx. 20 minutes. It can be added in batches or via a dosing pump. Bring the yeast suspension to the pitching temperature with the same quantities of mash (or must) to avoid a temperature shock.
Storage
Vacuum packed. Store in a cool, dry place. Packs which have been opened should be immediately tightly sealed and used within 2 ‐ 3 days.
Specially developed for the fermentation of full-bodied, tanninrich and colour intensive red wines. Provides aromas of cherries, berries and nuts and it supports the
Tannivin® Finesse is a complex tannin product, a balanced combination of ellagitannins and condensed
MostRein® PORE-TEC is a bentonite-activated carbon granulate for the preventive, careful treatment of mash/crushed grapes and must/grape juice
At
a) 120
- 120 litres - MKLF 120
- 200 litres - MKLF 200
- 300 litres - MKLF 300
- DIN 25
- DIN 32
- DIN 40
- DIN 50
- DIN 60
- DIN 65
- Model 1-FU
- Model 2-FU
- Model 3-FU
- DIN DN 32 x 25
- DIN DN 40 x 25
- DIN DN 50 x 32
- DIN DN 65 x 40
- DIN DN 50 x 40